|Size:||Diameter:1.75/3.0(dia.1.75 /3.0 Mm)||The Tolerance:||±0.03|
|Print Temperatu:||240°C -260°C.||Plate Temperature:||100-120℃|
|Colors:||12 Colors||Net Weight:||1.0kg/roll|
|Application:||FDM 3D Printer|
3d printer filament 3mm
Clear 3d printer filament PETG 1.75 mm 3d printer filament for 3d printer
PETG 3D printer filaments information:
PETG is a Glycol Modified version of Polyethylene Terephthalate (PET), which is commonly used to manufacture water bottles. It is a semi-rigid material with good impact resistance. The material also benefits from great thermal characteristics, allowing the plastic to cool efficiently with almost negligible warpage.
|Bed Setting||Masking tap or temperature resistant heat tape|
|Applicable Models||FDM—3D Printer|
In terms of the ease of working with in when 3D printing, the temperature resistance of PETG and its excellent layer adhesion has made it less prone to warping and shrinking. PETG filaments have been described as having a combination of the best properties of PLA and ABS: they are stronger and more temperature resistant, while still being easy to work with.
Being a thermoplastic, one of the more interesting characteristics of PETG is that it is 100% recyclable. It can be shaped and reshaped over and over again by heating without causing any degradation to the material. This means that scrap material (such as supports) and misprints can be reprocessed into new prints, and this process can be repeated indefinitely.
With its properties, we recommend using PETG filaments for printing products that may experience sudden or sustained stress, such as protective components and mechanical parts. PETG filament is also a good material when printing parts that are intended to come in contact with food material, such as cups and food containers.
1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest certificate.
2. Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3. The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.
4. To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.
Contact Person: He
Tel: +86 18665113128