|
Product Details:
|
| Colors: | 40 Colors | Size: | Diameter:1.75/3.0(dia.1.75 /3.0 Mm) |
|---|---|---|---|
| The Tolerance Roundness: | ±0.05 | Print Temperature: | 230°C -270°C. |
| Filament Net Weight: | 1kg/Spool | Advantages: | High Strength,good Toughness,stable In Performance |
| Disadvantage: | Prone To Cracking If Cooled Too Quickly | ||
| High Light: | Flexible ABS 3d Printer Filament,0.5kg ABS 3d Printer Filament,5kg 3d printer abs filament |
||
PLA ABS flexible 3d Printer Filament 1kg 5kg 0.5kg High Strength
Filament Introduction :
| Name | PLA |
| specification | 1.75mm 3.0mm |
| Net weight | 1.0kg |
| Gross weight | 1.3kg |
| Printing temperature | 200°C -240°C |
| Floor temperature | 100-120°C |
Product Description
PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter.
The best use of PLA is for printing concept models, prototypes, miniatures, jewelry, low-wear toys, etc.
Product Feature
1). Good toughness,High strength, High stiffness
2). No block nozzle, Good stick hot bed
3). Cost-effective can be processed in wide range temperature;
4). Low shrinkage, thermoforming dimensional stability
5). Accurate diameter: 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
6). Suitable for a variety of 3D printer, Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Huxley etc.
Product Information
|
PLA Filament
|
|||
|
Filament Diameter:
|
1.75/3.00mm
|
||
|
Tolerance:
|
±0.03mm
|
||
|
Print Temp:
|
190-210℃
|
||
|
Bed Temp:
|
Optional or 40-60℃
|
||
|
Print Speed:
|
40-100mm/s
|
||
|
Bed Setting:
|
Masking tap or temperature resistant heat tape
|
||
|
Applicable Models
|
FDM-3D Printer
|
||
Product Advantage
1. Material: Raw materials are all imported from the United State, there’s absolutely no defective, recyled raw materials or in it.
2. Weight: The net weight of Consumables is 1kg, component fully.
3. Appearance: support custom.
4. Repeated Teat Results:Compared with ordinary low consumables on the market, this material toughness stength, higther hardness, printing support artfifacts more easily removed.
Contact Person: He
Tel: +86 18665113128
