Product Details:
|
Size: | Diameter:1.75mm | The Tolerance Roundness: | ±0.03 |
---|---|---|---|
Print Temperature: | 230°C -270°C. | Filament Net Weight: | 1kg/Spool |
Material: | Plastic Strips | Gross Weight: | 1.3kg/Spool |
Highlight: | filament for 3d printer,3d printing filament |
1, Wire diameter: 1.75/3.0 mm
2, Print temperature: 230°C -270°C.
3, Material : PC and ABS
4, Plastic plate: black disk (disk diameter of 190, the shaft hole 50 mm)
5, Weight: 1.0 KG net weight, The Gross Weight is 1.3KG.
6, Color : Natural
7, All the filament have in stock
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material,
and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to make sure that sure that each batch of
new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right
range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size,
and this unqualified filament will be cut off and never use it.
4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant
inside of it
FAQ:
Dongguan Hengli Dejian Plastic Electrical Products Factory | ||||
Various types of material parameters control table | ||||
zhixiang-dg@163.com | ||||
Material | Specifications | Printing temperature (℃) |
Floor temperature (℃) |
Advantage |
PLA(contain Fluorescence/glow in dark) | 1.75/3.0 | 200-240 | 60-80 Or not heating | Biological degradation / printing without odor / not curling, not curling |
ABS(contain Fluorescence/glow in dark) | 1.75/3.0 | 230-270 | 100-120 | Good plating performance / toughness |
HIPS(contain Fluorescence/glow in dark) | 1.75/3.0 | 230-270 | 100-120 | Soluble in lemon |
Change color(31℃change color)ABS | 1.75/3.0 | 230-270 | 100-120 | Color changes at different temperatures |
Change color(31℃change color)PLA | 1.75/3.0 | 200-240 | 60-80 Or not heating | Color changes at different temperatures |
Light change color ( under the sun)ABS | 1.75/3.0 | 230-270 | 100-120 | change color under the sun |
Light change color ( under the sun)PLA | 1.75/3.0 | 200-240 | 60-80 Or not heating | change color under the sun |
Nylon | 1.75/3.0 | 250-280 | 100-120 | Good rigidity and elasticity |
PC | 1.75/3.0 | 250-280 | 100-120 | Hardened with toughness, temperature resistance of 125℃ |
POM | 1.75/3.0 | 200-240 | 100-120 | Wear resistance and torsion resistance, good insulation performance |
PETG | 1.75/3.0 | 200-240 | 100-120 | Acid and alkali resistant / good toughness |
ConductiveABS | 1.75/3.0 | 230-260 | 100-120 | Effective release and prevent the generation of static electricity |
Wood( base material is ABS ) | 1.75/3.0 | 180-195 | 80-100 | Like real wood/ Can be nailed, can be drilled, can be carved . |
Wood(base material is PLA) | 1.75/3.0 | 180-195 | 80-100 | Like real wood/ Can be nailed, can be drilled, can be carved . |
PVA | 1.75/3.0 | 190-220 | not heating | Water soluble material |
Flexible(TPU) | 1.75/3.0 | 200-220 | 60-80 | High soft, high elastic / food grade |
Flame Retardant | 1.75/3.0 | 230-270 | 100-120 | Fire prevention function |
Metal | 1.75/3.0 | 190-210 | 60 Or not heating | Good gloss, corrosion resistance |
Polymer Composites(Like silk) | 1.75/3.0 | 200-220 | not heating | High gloss, easy to peel, print smooth |
110℃PETG | 1.75/3.0 | 200-240 | 100-120 | Acid and alkali resistant / good toughness / high temperature resistance |
Carbon fiber | 1.75/3.0 | 200-220 | not heating | Matte black, strength, shrinkage rate is small |
ASA | 1.75/3.0 | 230-260 | 100-120 | Anti ultraviolet (anti-aging) |
Soft PLA | 1.75/3.0 | 200-220 | not heating | Good elasticity, good flexibility. |
PCL | 1.75/3.0 | 70-100 | Low temperature materials, used for 3d print pen | |
Multicolor Gradient | 1.75 | 180-210 | 60-80 Or not heating | One roll filament have different color, every roll is different |
H-PLA(100℃PLA) | 1.75 | 200-240 | 60-80 Or not heating | High temperature (100 ℃), high toughness PLA |
Ceramic | 1.75 | 200-240 | 60-80 | Surface light and ceramic texture,wear resistance |
PC+ABS | 1.75 | 230-270 | 100-120 | high hardness, good toughness, good rigidity |
Marble | 1.75 | 200-230 | 60-80 Or not heating | Marble texture |
Twinkling | 1.75 | 200-230 | 60-80 Or not heating | The surface is twinkling |
PETG-Carbon fiber | 1.75/3.0 | 230-250 | 80-100 | Better than PLA-Carbon fiber toughness, strength |
PVB polished filament | 1.75 | 190-220 | 70 Or not heating | Polished, not easy to warp, easy to print |
Packaging:
Contact Person: Monica
Tel: +86 13533633723
Fax: 86--0769-82329070