|
Product Details:
|
| Size: | Diameter:1.75/3.0(dia.1.75 /3.0 Mm) | Print Temperature: | 180°C -195°C. |
|---|---|---|---|
| Filament Net Weight: | 0.8kg / Roll | The Tolerance Roundness: | ±0.05 |
| Length: | 310m | Gross Weight: | 1.1/kg |
| Material: | WOOD | Advantages: | Can Be Biodegradable,small Shrinkage,non-toxic,stable In Performance |
| Disadvantage: | Can Droop If It Gets Too Hot | ||
| High Light: | 3d printing wood filament,wood filament 1.75mm |
||
Desktop 3D Printing Wood Filament Diameter Wooden Material 1.75mm / 3.0mm
Wood Filament:
1. Specifications : 1.75&3.0
2. Manner and packing: use vacuum package, the net weight 0.8KG.
3.Wire is a native flour produced a new composite material, can anti-corrosion, moisture, acid, not moldy characteristics.
4.Print product close to wood effect.Distributing wood taste,Like wood, can nails, drilled and carved.
5. When the wood fibers in the nozzle and heating, do not wait very long, Otherwise it will swell and burned wood flour.When you heat and temperature sufficient to print your hand into the wood fiber model immediately.
6.Working temperature180°C -195°C.
7.Floor without heating or heating 60-80 ℃.
8.Color: light wood (ABS as the substrate), dark brown (PLA as the substrate).
1. Material quality:we have PLA,ABS,HIPS,Nylon(PA),PC,POM,PETG,PVA(Water solubility),Wood,Flexible(TPU),ConductiveABS,
Glow in Dark,Fluorescence,Change color,Light Change,Flame retardant,Metal filament, Polymer composite(like silk),High temperature resistance 110℃PETG,carbonfiber,ASA,SoftPLA,Multicolor Gradient,Ceramic,PC+ABS,Marble, Twnkling,PETG-Carbon Fiber ,PVB andso on.
2. Specifications:1.75&3.003.packing:We use plastic spool,the net weight 1.0KG,we put desiccant in it,use vacuum package,every Tray into a small box,box size:21*21*8CM,and the each 8 small box into a master carton.
3. Carton size:43.5*43.5*18cm
4.Plastic spool:Diameter 200mm,axle hole156mm,overall height 70mm.
5.Spool Choice:0.25KG 0.5KG 1KG 2KG 5KG
6.3d pen filament:6m,10m,20m.
FAQ:
| Dongguan Hengli Dejian Plastic Electrical Products Factory | ||||
| Various types of material parameters control table | ||||
| zhixiang-dg@163.com | ||||
| Material | Specifications | Printing temperature (℃) |
Floor temperature (℃) |
Advantage |
| PLA(contain Fluorescence/glow in dark) | 1.75/3.0 | 200-240 | 60-80 Or not heating | Biological degradation / printing without odor / not curling, not curling |
| ABS(contain Fluorescence/glow in dark) | 1.75/3.0 | 230-270 | 100-120 | Good plating performance / toughness |
| HIPS(contain Fluorescence/glow in dark) | 1.75/3.0 | 230-270 | 100-120 | Soluble in lemon |
| Change color(31℃change color)ABS | 1.75/3.0 | 230-270 | 100-120 | Color changes at different temperatures |
| Change color(31℃change color)PLA | 1.75/3.0 | 200-240 | 60-80 Or not heating | Color changes at different temperatures |
| Light change color ( under the sun)ABS | 1.75/3.0 | 230-270 | 100-120 | change color under the sun |
| Light change color ( under the sun)PLA | 1.75/3.0 | 200-240 | 60-80 Or not heating | change color under the sun |
| Nylon | 1.75/3.0 | 250-280 | 100-120 | Good rigidity and elasticity |
| PC | 1.75/3.0 | 250-280 | 100-120 | Hardened with toughness, temperature resistance of 125℃ |
| POM | 1.75/3.0 | 200-240 | 100-120 | Wear resistance and torsion resistance, good insulation performance |
| PETG | 1.75/3.0 | 200-240 | 100-120 | Acid and alkali resistant / good toughness |
| ConductiveABS | 1.75/3.0 | 230-260 | 100-120 | Effective release and prevent the generation of static electricity |
| Wood( base material is ABS ) | 1.75/3.0 | 180-195 | 80-100 | Like real wood/ Can be nailed, can be drilled, can be carved . |
| Wood(base material is PLA) | 1.75/3.0 | 180-195 | 80-100 | Like real wood/ Can be nailed, can be drilled, can be carved . |
| PVA | 1.75/3.0 | 190-220 | not heating | Water soluble material |
| Flexible(TPU) | 1.75/3.0 | 200-220 | 60-80 | High soft, high elastic / food grade |
| Flame Retardant | 1.75/3.0 | 230-270 | 100-120 | Fire prevention function |
| Metal | 1.75/3.0 | 190-210 | 60 Or not heating | Good gloss, corrosion resistance |
| Polymer Composites(Like silk) | 1.75/3.0 | 200-220 | not heating | High gloss, easy to peel, print smooth |
| 110℃PETG | 1.75/3.0 | 200-240 | 100-120 | Acid and alkali resistant / good toughness / high temperature resistance |
| Carbon fiber | 1.75/3.0 | 200-220 | not heating | Matte black, strength, shrinkage rate is small |
| ASA | 1.75/3.0 | 230-260 | 100-120 | Anti ultraviolet (anti-aging) |
| Soft PLA | 1.75/3.0 | 200-220 | not heating | Good elasticity, good flexibility. |
| PCL | 1.75/3.0 | 70-100 | Low temperature materials, used for 3d print pen | |
| Multicolor Gradient | 1.75 | 180-210 | 60-80 Or not heating | One roll filament have different color, every roll is different |
| H-PLA(100℃PLA) | 1.75 | 200-240 | 60-80 Or not heating | High temperature (100 ℃), high toughness PLA |
| Ceramic | 1.75 | 200-240 | 60-80 | Surface light and ceramic texture,wear resistance |
| PC+ABS | 1.75 | 230-270 | 100-120 | high hardness, good toughness, good rigidity |
| Marble | 1.75 | 200-230 | 60-80 Or not heating | Marble texture |
| Twinkling | 1.75 | 200-230 | 60-80 Or not heating | The surface is twinkling |
| PETG-Carbon fiber | 1.75/3.0 | 230-250 | 80-100 | Better than PLA-Carbon fiber toughness, strength |
| PVB polished filament | 1.75 | 190-220 | 70 Or not heating | Polished, not easy to warp, easy to print |
Product dispaly:
Packaging:
Contact Person: He
Tel: +86 18665113128
